Control Techniques - Lynx

The Lynx SM dc Controller from Control Techniques is now obsolete and can no longer be supplied as a new unit.

As a 'legacy product' we can however offer service/exchange units for break-downs. If you return your faulty unit to use we can supplied a previously repaired unit in it's place.

The Lynx SM series of DC motor speed controllers are designed for efficient speed control of conventional wound-field motors and permanent magnet motors in the 0.55 to 7.5 kW range.

All units come with a full 12 month warranty. If we do not have the size of drive in stock we can undertake a repair to your existing unit (subject to the drive in question being repairable).

The Controls Techniques Lynx SM dc drive comprise three models, each capable of utilizing 220/240V single phase or 380/440V supply.

For more details please contact us by email at sales@acpd.co.uk or telephone us on +44 (0)161 343 1884.

Product Specification

Key Features

          * Surface mount technology
          * Dual input voltages link selectable
          * Set speed input 0-10V/4-20 mA
          * Switch selectable features
          * Speed/torque control
          * Tacho/AVF scaling
          * Status/fault or low speed/zero reference
          * Full wave bridge - half controlled
          * 20:1 constant torque speed range
          * 2% regulation for 100% load change with AVF (0.5% with tacho feedback)
          * Overload protection 150% FLC for 10 seconds with trip indication
          * Ambient -10º to +40ºC
          * Fully isolated electronics
          * Dual Input Voltages
          * Manufactured in accordance with BS5750/ISO 9002
          * Wound field/permanent magnet motor controller
          * Speed/Torque Control
          * Armature/Tacho feedback scaling
          * Current feedback scaling
          * Separately adjustable ramps
          * 0-10V, 4-20 mA reference
          * CSA approved

Rating Table

Model	Supply	Motor kW Typical	Average Motor Current (A)
Lynx 8	220-240V 1ph 50/60 Hz	1.1kW	8 amps
Lynx 16	220-240V 1ph 50/60 Hz	2.0kW	16 amps
Lynx 30	220-240V 1ph 50/60 Hz	3.75kW	30 amps

Supply	Motor kW Typical	Average Motor Current (A)
Supply 380-440V 1ph 50/60 Hz	2.2kW	8 amps
Supply 380-440V 1ph 50/60 Hz	4.0kW	16 amps
Supply 380-440V 1ph 50/60 Hz	7.5kW	30 amps

Dimensions

Model

Width (mm)

Height (mm)

Depth (mm)

Lynx

255mm

92mm

150mm

Request A Quote

If you have any questions please complete the form below and we will be intouch:

Name

Company Name

Company Address

E-mail Address

Phone Number

Comments

ReCaptcha