Ethernet Switches
Ethernet Switch - INS-1500X
The INS-1500 series brings fast Ethernet to the factory floor. The 5-port switch is designed for industrial use and supports 10/100Base-TX and 100Base-FX fiber options.
The switches are DIN rail mountable. Both straight and crossover cables can be used between the switch and any other device. Auto polarity is also supported.
The INS-1500 switches are housed in ruggedized DIN-RAIL enclosure designed for harsh industrial environments INS-1500 is a key component in an Ethernet solution where maximum reliability and lowest cost of ownership are required. Industrial components, fanless design and industrial agency approval ensure reliability. Key features:
- RJ-45 connectors with auto-polarity
- MT-RJ connector on the fiber port (FM & FS series)
- Reverse power polarity protection.
- Auto-negotiation of speed and duplex per port.
- Store-and-forward transmission at full wire speed.
- Wide power supply range, 18 - 60 VDC.
- Low power consumption, typ: 3.8W, max 4.2W.
- Wide temperature range, -40 - +70Cº
- Protection Class IP 40.
- Redundant power input.
- Rugged Metal Enclosure
- DIN rail mounting |
|
Ethernet Switches - INS-1500FS & INS-1500FM
The INS-1500FS contains four 10/100 Mbps twisted pair ports (TX) and one Single mode fiber port (FX) and the INS-1500FM contains four 10/100 Mbps twisted pair ports (TX) and one Multi mode mode fiber port (FX).
These switches are plug-and-play devices thus, no configuration setup is required by the user. However, autonegotiation, speed and duplex connectivity settings are available via push buttons on the front panel if this is needed. Indicators for Speed, Duplex Connectivity, Link, Activity and Errors are available on the front panel. |
|
The switches are equipped with two power inputs to achieve redundancy. The internal power supply has 1500VDC isolation, and the power inputs have reverse polarity protection.
|
