SinuMEC - More than a Soft starter

SinuMEC is a new and innovative range of 'next generation' soft starters that give the user so much more than just a soft start and soft stop to the induction motor connected to it. The SinuMEC saves the user energy whilst the motor is being run and in many cases it can be shown to have a payback time of 2 years or less. Why use the old type of soft starter when you can be using a SinuMEC and saving your company lots of money?
 
SinuMEC (Sinusoidal Motor Efficiency Controllers) are designed as a pure sinusoidal controller for use on constant speed applications with partial or variable load motors. SinuMEC is a reduced voltage starter and energy controller which is designed to providevoltage reduction of 100/180V (120/216V in 480V, 60Hz) during motor start-up and during operation in 'Save Mode'.
 
SinuMEC provides a pure sine wave, resulting in no harmonic pollution being introduced to the network and furthermore, since the SinuMEC has a transformer in series, it can reduce harmonic pollution if it exists at that location.
 
There are seven model sizes in the SinuMEC series ranging from the SinuMEC 15A (7.5kW / 10HP) to the SinuMEC 142A (75kW / 100HP.

Typical applications in which the SinuMEC soft starters can be used are:
 
- Conveyors
- Bucket Elevators
- Escalators
- Mill
- Sifter
- Presses
- Fans
- Crushing, Flaker, Grinder
- Granulators
- Shredders
- Bailers
- Mixers
- Hydraulic Pumps
- Vacuum Pumps
- Perforators
- Compressor

SinuMEC can provide the user with the following benefits:
 
- Production capacity can be added by reducing KVA demand
- Improvement in the reliability of the motors
- No change to motor speed or torque
- Improvement in energy efficiency reducing electrical consumption