Mitsubishi FR-D700 series inverter - FR-D720S-100-E8

£692.00
Specifications
Brand: Mitsubishi
AC Drive Current High Load: 10A
Enclosure: IP20
AC Drive Temp: Fan Cooling
Filter Included: Without Filter
Mounting Type: Panel mounting
Product Details
Mitsubishi D720 Series AC Frequency Inverter, type: FR-D720-100-E8, with Option E8 for 2.2kW (3HP) 230V 3 Ph motor in VxF or Vector control to 10A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor. Includes E8 Washing Machine Software (Check for availability before purchase as these are limited stock) Overload - 150% x 60 Seconds and 200% for 0.5 seconds. Speed Control Range - 0.2-400Hz. Braking - 30% rated to 60 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor. Features - Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output. Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below). EMC Filters - None. See linked products below for external footprint EMC Filter Module. Input Current - 24.4A Input Voltage - 200-240V single phase -15%, +10% at 50/60Hz +/- 5%. Cubicle or enclosure mounting. Rated at 50C Ambient. Ventilation space above and below - 100mm. Ventilation space at sides - 0mm up to 40C, or 10mm above 40C. Ventilation space in front - 10mm. Heat Loss at max output - 110W. Mounting via 4 x 5mm holes for rear mounting. 140mm Wide x 145mm Deep x 150mm high in IP20 case. Weight is 1.9kg