Mitsubishi FR-E700 series inverter - FR-E720S-050SC-EC

Mitsubishi FR-E700SC Series AC Frequency Inverter, type: FR-E720S-050SC-EC for 0.75kW (1HP) 3 Phase motor in VxF or Sensorless Vector control to 5A. Simple set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor. Overload - 150% x 60 seconds, 200% x 3 seconds Speed Control Range - 0.2Hz to 400Hz. Braking - To 100 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page. 2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port. 'Safe Stop' Function to SIL2 Input Current - 10.9A. Input Voltage - 200-240V Single Phase +10% -15% at 50/60Hz ñ5% EMC Filters - Not included (see linked products below for external EMC filter module) Wall mount in clean environment or cubicle mount. Rated -10ø to 50øC Ambient. Ventilation space in front - 10mm Ventilation space above and below - 100mm. Ventilation space at sides - 0mm (10mm when surrounding air temperature exceeds 40øC). Mounting via 4 x 5mm diameter holes at rear on 96mm x 118mm centres. Size 2A - 108mm Wide x 141.5mm Deep x 128mm High. IP20 This is the replacement for the obsolete FR-E720S-050-EC Can be used as an alternative or to replace FR-E720S-0.75K, FR-E720S-050-NA or FR-E720S-0.75K-CHT subject to the differences detailed in the FR-E700 Overseas Specification Comparison document (see link to PDF below).